Im-M1202 Series Motor Protector Thermal Overload AC Relay

Im-M1202 Series Motor Protector Thermal Overload AC Relay

Simple Data Dimensions(mm) 29×23.5×16
Excess weight ( g ) ≈40g
Make contact with Arrangement 1A/1B
Make contact with Content AgSnO2
Ambient Temperature -40~+75ºC
Vibration ten~50Hz,one.5mm
Shock 1000m/s²,(100g)
Specifications Data Electrical power Use <3W
Functioning Voltage 10.five-16V
Max. Switching Present 100A
Surge Current 6000A/10ms
Motor Resistance 32(1±15%)Ω
Make contact with Voltage <60mV
Speak to Resistance ≤1.0mΩ
Dielectric Energy Motor to Contact >4000VAC,50/60Hz 1min
Across Open Make contact with >2000VAC,fifty/60Hz 1min
CZPTal Existence(one hundred twenty cycles/H) 10,000
(resistance five k + perceptual 5 k, co ϕ = .5)
Mechanical Life(3600 cycles/H) one hundred,000
Pulse Time ≥60ms(Suggest 60ms~100ms)
Selecting-up Time ≤60ms
Release Time ≤60ms
Insulation Resistance >1000MΩ(500VDC)

           Cautions of Latching Relay:

             1.Suggestions of relay’s enter
            (1)Polarity-Make sure you check the polarity inside of of our specialized specification, if one coil then”+ -” or “- +”are good,

            you can adjust it by a single pulse.If double coil then it is essential to verify “-+-” or “+-+”prior to leaving the our factory.

            (two)Driving-Please energize the relay at our recommend pulse width, rated voltage for reputable efficiency, if one.5

            moments or two moments of value or decrease driving situation plz verify with our engineer.
            (three)Relays’contact status could be transformed throughout transportation or installation due to impact of exterior force,
            consequently make sure you reset to the needed status.


            two.Tips of relay’s output
            (1)When selecting the relay with challenging link,remember to keep away from the external power on load terminals for the duration of or soon after

            the set up.

            (two)When the relay will be linked with screw or bolts to the relays’ terminals, plz make sure your relationship is

            fixed and avoid relay from damages or other safety troubles due to temp. Rise..

            (3)The sampling sign wires of products are restricted, please do not pull or torque during set up.


Im-M1202 Series Motor Protector Thermal Overload AC Relay