China Hot selling Worm gear stepping motor nema 23 2 phases 4 leads 3Nm 57 hybrid NMRV25 worm gearbox plus nema 23 right angle stepper motors with Great quality

At FirstHow to choose workable stepper motor with gearbox(stepping motor with reducer or geared stepper motor)?
First make it clear of the speed(rpm),torque(Nm or ,positioning or motion accurate of the motor ,efficient,selflock needed or note. then we also need to consider the size(or mounting space),shape of the motor.

Product name
Worm gear stepping motor nema 23 2 phases 4 leads 3Nm 57 hybrid NMRV25 worm gearbox plus nema 23 right angle stepper motors ,reducer type right angle gear,ratio from 10 to 300 are optional,metal gear, reliable,quietApplication:
Auto shutter , blinding machine , automatic TV rack, money counter, spot light, tissue machine, office equippments, Transmission machine gearbox Electric crane 220 voltage helical reducer speed gear motor household appliances, automatic actuator door opener lifting motor wiper motor,window,curtain,drum,life,industrial machine,drilling machine,engraving machine,milling machineMaterial
alloy/zinc/bronze/steel/stainless steel/hybrid/PMMain structure &characteristics
Worm gear stepping motor nema 23 2 phases 4 leads 3Nm 57 hybrid NMRV25 worm gearbox plus nema 23 right angle stepper motors
strong holding torque and selflock ability
Our Advantages:
1. Engineering(technology) teams plus factory standby,ensure the motors meet the quality standards with low cost.
2. Engineering(technology) teams plus factory 24hours support and standby , ensure the motors will be delivereied on time.
3.Provide warm and friendly service and after-sale service for motors,more than 1 year quality guarantee,alibaba endorsement , order anytime with confidence
4. More than 10years experience research and manufacture of motors and gearboxes, more than 15years experience exporting.
5. Precise and advanced equipments and machines, Gearbox bearing pilot 32271-NA003 for CWB450 CKB459 PF6 NISSAN Diesel UD TRUCK careful engineers, perfect and strict material /parts and production products testing process.

Q1 Are you the gear motor manufacturer?
Yes sure.
Q2 Do you have the best price? we always provide good products with reasonable and good price.
Q3 Gear motor products can be customized?
Yes, the general situation can be customized. We offer OEM service.

Product information1. Product title
Worm gear stepping motor nema 23 2 phases 4 leads 3Nm 57 hybrid NMRV25 worm gearbox plus nema 23 right angle stepper motors
2. Product photos

3. Product size

4. Product datalist and performance

ModelDriver Voltage
step angle

Stepper Motor Rated speed
Phase current(A)Motor holding torque

output speed
output torque

Available reduction
RV25-BS57L76-3571 1.8 6002.5 3357130>605-80RV25-BS57L76-6571 1.8 6002.5 3657160>605-80
5. Product advantages and features
This Nmrv25 gearboxes are standard models,Al.alloy material body,miniature size,light,and reliable,can be assembled with a single or double shaft output,well matched with nema 23 series stepper motors, either the size and the shape. miniature size for such application, with strong torque output,reliable selflock performance, widely used in Industrial machines due to its light body,high efficient,reliable.
stepper motors can be assembled with Electromagnetic encoders or brakes.
6. Product certifications
CE & Synchronous Pulley AT5 AT10 40 Teeth 15MM Belt Width With Keyway Aluminum Timing Belt Pulley Rohs.

7. Related Products
Stepper motor drivers and other parts

Advantage-our idea
Company Introduction1. Company profile
our comany and factory were built in 2008, mainly engaged in the design, R & D, production and sales of mechanical,electrical, automation equipment and mechanical parts, such as dc motors,ac motors,stepper motors,servo motors with most kinds of gearbox,and drivers.

2. Strength of the company
A. Factory picture

B. Team and stuff picture

C. Qualification (ISO,Trademark)
we have ISO certification, BOBET,BM,BM Motors are our trademarks.

D. Other products (major categories)

DC motors,AC motors, FULL WERK Propeller Shaft Drive shaft 37140-87404 for japanese car Servo motors, motor gear motors and drivers.

How to Calculate the Diameter of a Worm Gear

worm shaft
In this article, we will discuss the characteristics of the Duplex, Single-throated, and Undercut worm gears and the analysis of worm shaft deflection. Besides that, we will explore how the diameter of a worm gear is calculated. If you have any doubt about the function of a worm gear, you can refer to the table below. Also, keep in mind that a worm gear has several important parameters which determine its working.

Duplex worm gear

A duplex worm gear set is distinguished by its ability to maintain precise angles and high gear ratios. The backlash of the gearing can be readjusted several times. The axial position of the worm shaft can be determined by adjusting screws on the housing cover. This feature allows for low backlash engagement of the worm tooth pitch with the worm gear. This feature is especially beneficial when backlash is a critical factor when selecting gears.
The standard worm gear shaft requires less lubrication than its dual counterpart. Worm gears are difficult to lubricate because they are sliding rather than rotating. They also have fewer moving parts and fewer points of failure. The disadvantage of a worm gear is that you cannot reverse the direction of power due to friction between the worm and the wheel. Because of this, they are best used in machines that operate at low speeds.
Worm wheels have teeth that form a helix. This helix produces axial thrust forces, depending on the hand of the helix and the direction of rotation. To handle these forces, the worms should be mounted securely using dowel pins, step shafts, and dowel pins. To prevent the worm from shifting, the worm wheel axis must be aligned with the center of the worm wheel’s face width.
The backlash of the CZPT duplex worm gear is adjustable. By shifting the worm axially, the section of the worm with the desired tooth thickness is in contact with the wheel. As a result, the backlash is adjustable. Worm gears are an excellent choice for rotary tables, high-precision reversing applications, and ultra-low-backlash gearboxes. Axial shift backlash is a major advantage of duplex worm gears, and this feature translates into a simple and fast assembly process.
When choosing a gear set, the size and lubrication process will be crucial. If you’re not careful, you might end up with a damaged gear or one with improper backlash. Luckily, there are some simple ways to maintain the proper tooth contact and backlash of your worm gears, ensuring long-term reliability and performance. As with any gear set, proper lubrication will ensure your worm gears last for years to come.
worm shaft

Single-throated worm gear

Worm gears mesh by sliding and rolling motions, but sliding contact dominates at high reduction ratios. Worm gears’ efficiency is limited by the friction and heat generated during sliding, so lubrication is necessary to maintain optimal efficiency. The worm and gear are usually made of dissimilar metals, such as phosphor-bronze or hardened steel. MC nylon, a synthetic engineering plastic, is often used for the shaft.
Worm gears are highly efficient in transmission of power and are adaptable to various types of machinery and devices. Their low output speed and high torque make them a popular choice for power transmission. A single-throated worm gear is easy to assemble and lock. A double-throated worm gear requires two shafts, one for each worm gear. Both styles are efficient in high-torque applications.
Worm gears are widely used in power transmission applications because of their low speed and compact design. A numerical model was developed to calculate the quasi-static load sharing between gears and mating surfaces. The influence coefficient method allows fast computing of the deformation of the gear surface and local contact of the mating surfaces. The resultant analysis shows that a single-throated worm gear can reduce the amount of energy required to drive an electric motor.
In addition to the wear caused by friction, a worm wheel can experience additional wear. Because the worm wheel is softer than the worm, most of the wear occurs on the wheel. In fact, the number of teeth on a worm wheel should not match its thread count. A single-throated worm gear shaft can increase the efficiency of a machine by as much as 35%. In addition, it can lower the cost of running.
A worm gear is used when the diametrical pitch of the worm wheel and worm gear are the same. If the diametrical pitch of both gears is the same, the two worms will mesh properly. In addition, the worm wheel and worm will be attached to each other with a set screw. This screw is inserted into the hub and then secured with a locknut.

Undercut worm gear

Undercut worm gears have a cylindrical shaft, and their teeth are shaped in an evolution-like pattern. Worms are made of a hardened cemented metal, 16MnCr5. The number of gear teeth is determined by the pressure angle at the zero gearing correction. The teeth are convex in normal and centre-line sections. The diameter of the worm is determined by the worm’s tangential profile, d1. Undercut worm gears are used when the number of teeth in the cylinder is large, and when the shaft is rigid enough to resist excessive load.
The center-line distance of the worm gears is the distance from the worm centre to the outer diameter. This distance affects the worm’s deflection and its safety. Enter a specific value for the bearing distance. Then, the software proposes a range of suitable solutions based on the number of teeth and the module. The table of solutions contains various options, and the selected variant is transferred to the main calculation.
A pressure-angle-angle-compensated worm can be manufactured using single-pointed lathe tools or end mills. The worm’s diameter and depth are influenced by the cutter used. In addition, the diameter of the grinding wheel determines the profile of the worm. If the worm is cut too deep, it will result in undercutting. Despite the undercutting risk, the design of worm gearing is flexible and allows considerable freedom.
The reduction ratio of a worm gear is massive. With only a little effort, the worm gear can significantly reduce speed and torque. In contrast, conventional gear sets need to make multiple reductions to get the same reduction level. Worm gears also have several disadvantages. Worm gears can’t reverse the direction of power because the friction between the worm and the wheel makes this impossible. The worm gear can’t reverse the direction of power, but the worm moves from one direction to another.
The process of undercutting is closely related to the profile of the worm. The worm’s profile will vary depending on the worm diameter, lead angle, and grinding wheel diameter. The worm’s profile will change if the generating process has removed material from the tooth base. A small undercut reduces tooth strength and reduces contact. For smaller gears, a minimum of 14-1/2degPA gears should be used.
worm shaft

Analysis of worm shaft deflection

To analyze the worm shaft deflection, we first derived its maximum deflection value. The deflection is calculated using the Euler-Bernoulli method and Timoshenko shear deformation. Then, we calculated the moment of inertia and the area of the transverse section using CAD software. In our analysis, we used the results of the test to compare the resulting parameters with the theoretical ones.
We can use the resulting centre-line distance and worm gear tooth profiles to calculate the required worm deflection. Using these values, we can use the worm gear deflection analysis to ensure the correct bearing size and worm gear teeth. Once we have these values, we can transfer them to the main calculation. Then, we can calculate the worm deflection and its safety. Then, we enter the values into the appropriate tables, and the resulting solutions are automatically transferred into the main calculation. However, we have to keep in mind that the deflection value will not be considered safe if it is larger than the worm gear’s outer diameter.
We use a four-stage process for investigating worm shaft deflection. We first apply the finite element method to compute the deflection and compare the simulation results with the experimentally tested worm shafts. Finally, we perform parameter studies with 15 worm gear toothings without considering the shaft geometry. This step is the first of four stages of the investigation. Once we have calculated the deflection, we can use the simulation results to determine the parameters needed to optimize the design.
Using a calculation system to calculate worm shaft deflection, we can determine the efficiency of worm gears. There are several parameters to optimize gearing efficiency, including material and geometry, and lubricant. In addition, we can reduce the bearing losses, which are caused by bearing failures. We can also identify the supporting method for the worm shafts in the options menu. The theoretical section provides further information.

China Hot selling Worm gear stepping motor nema 23 2 phases 4 leads 3Nm 57 hybrid NMRV25 worm gearbox plus nema 23 right angle stepper motors  with Great qualityChina Hot selling Worm gear stepping motor nema 23 2 phases 4 leads 3Nm 57 hybrid NMRV25 worm gearbox plus nema 23 right angle stepper motors  with Great quality

Tagsangle gearbox | china gearbox | china motor | china motors | china stepper motor | china stepper motors | Gear | gear 2 | gear 4 | gear gearbox | gear motor | gear motor gearbox | gear motors | gear motors gearbox | gear with motor | gear with motors | gear worm | gear worm motor | gear worm motors | gearbox | gearbox 4 gear | gearbox china | gearbox gear | gearbox motor | gearbox motors | gearbox with | hot gear | motor | motor gearbox | motor gearbox china | motor motor | motor nema 23 | motor stepper | motor worm | motor worm gearbox | motors | motors gearbox | motors gearbox china | motors motors | motors nema 23 | motors stepper | motors worm | motors worm gearbox | nema 23 gearbox | nema 23 right angle gearbox | nema 23 stepper motor | nema 23 stepper motors | nema 23 worm gear | nema 23 worm gearbox | nema gearbox | nema motor | nema motors | right angle gear motor | right angle gear motors | right angle gearbox | right angle motor | right angle motor gearbox | right angle motors | right angle motors gearbox | right angle worm gearbox | stepper gear motor | stepper gear motors | stepper motor | stepper motor gearbox | stepper motor nema | stepper motor nema 23 | stepper motor with gearbox | stepper motors | stepper motors gearbox | stepper motors nema | stepper motors nema 23 | stepper motors with gearbox | worm & worm gear | worm gear | worm gear gearbox | worm gear motor | worm gear motors | worm gear stepper | worm gear worm | worm gearbox | worm motor | worm motor gear | worm motors | worm motors gear