China 60mm 300 watt BLDC motor Worm geared Brake Brushless Dc Motor 300W braked 48V NEMA24 Gearbox Reducer compact worm gearbox

Guarantee: 3months-1year
Model Amount: 60BLSWGB120
Utilization: BOAT, Vehicle, Electric powered Bicycle, Wholesale limited pitch precision transmission conveyor chain solitary chain bushing chain Supporter, Residence Appliance, Cosmetic instrument, Litepro Folding Bicycle sprocket 130 bcd 52T 56T 58T Crankset BMX Bicycle folding bike Chainwheel chain ring For Brompton bike Smart House
Kind: Brushless Motor
Torque: .95Nm
Construction: Long lasting Magnet
Commutation: Brushless
Shield Attribute: Totally Enclosed
Velocity(RPM): 3000RPM
Constant Recent(A): 8.8A
Performance: Ie three
Matched driver: BL30
Brake sort: Permanent magnet DC24V electricity off brake
Packaging Particulars: Carton
Port: HangZhou, HangZhou, HangZhou

If you require 3D product of the motor, New CE pruner multi operate equipment established sixty two cc prolonged attain pole chainsaw remember to give us your e-mail handle and we will electronic mail you it.

Specification:

Model
Voltage
(VDC)
Motor Rated Parameters
Motor
Peak
Torque
(N.m)
Torque
Constant
(N.m/A)
Back
EMF
(V/k
RPM)
Motor
Rotor
Inertia
(kg.mmtwo)
Length
(L:mm)
Weight
(kg)
Brake
Torque
(N.m)
Gear
Ratio
Velocity
(rpm)
Torque
(N.m)
Recent
(A)
Electricity
(W)
J60BLSWGB99-430A
48
3000
.sixty five
six.5
two hundred
1.95
.065
four.five
forty eight
233
three.05
1.9
5:1
7.5:one
10:1
fifteen:1
twenty:1
25:one
thirty:1
forty:1
50:1
60:1
80:1
J60BLSWGB120-430A
3000
.95
eight.eight
300
two.85
.126
9.three
seventy two
254
3.forty five

Other equipment ratio is satisfactory, the brake is DC24V energy-off brake, other voltage can be tailored as required.

Dimension Device:mm

Wiring Diagram

worm reducer

A-Drive PWC single worm reducer gearbox

A worm gear is a gear used to reduce the speed of a mechanical device. Often used in the automotive and shipbuilding industries, these gears have a lifespan comparable to many other types of reducer gearboxes. As a result, worm gears continue to be popular with engineers.

Agknx driver

Conical drive worm reducer gearboxes are an excellent choice for a variety of applications. The double-enveloping worm gear geometry of the Agknx Drive reducer gearbox provides a larger contact area and higher torque carrying capacity. This specialized gear system is also ideal for applications requiring higher precision.
Agknx Drive’s products are ideal for the solar, packaging, steel, food and pulp and paper industries. Additionally, Agknx Drive’s products are ideal for motion control and medium to heavy duty applications. The company’s dedicated sales and service teams are available to assist with your specific needs.
Agknx drive worm gear reducer gearboxes are available in single, double and triple reductions. Depending on the application, a single stage unit can transport up to 7,500 lbs. of torque. Its low-cost, compact design makes it a convenient option. Conical drive gearboxes are versatile and durable.
X & H

X & H worm gear units feature worm gear sets and are available in two different series. The X-Series includes XA versions with shaft and XF to XC versions with motor mounts. Compared to the XC compact series, the XF series offers outstanding versatility and higher efficiency. The H series combines the features of the X series with a spur gear pre-stage on the input. The H series has a die cast aluminum housing and cast iron shaft.
The X & H Worm reducer gearbox Series “H” helical gears are compatible with NMRV and C side input 56F wired motors. These gear reducer gearboxes are low cost and easy to install. They feature a cast iron housing and four threaded mounting holes.
RV seriese aluminum right angle

RV seriese aluminum right angle worm reduces versatility and durability. They are available in a variety of sizes including 25, 30, 40, 50, 63, 75, 110, 130, 150. Featuring standard NEMA motor input flanges and torque arm or foot mounting options, these reducer gearboxes are ideal for a variety of applications.
RV series worm gear reducer gearbox is made of high-quality aluminum alloy with compact structure. It also features light weight, corrosion resistance and low noise. Its housing is made of die-cast aluminum alloy, while the worm gear is made of 20CrM. The worm gear is heat treated by carbon quenching to increase its hardness. The thickness of the carbide layer is between 0.3-0.5mm.
These worm gear reducer gearboxes have multiple functions to maximize efficiency. In addition to being corrosion resistant, they are available in a variety of sizes to suit any application. Other features include a corrosion-resistant cast iron housing, enclosed breather, double-lip seal and magnetic drain plug. These worm gear reducer gearboxes are available with single or dual input shafts and are interchangeable with NMRVs.
Aluminum alloy right angle worm reducer gearbox is a light, durable and efficient gear reduction device. Its compact design makes it lighter than other gearheads, while its rust-resistant surface and long life make it an excellent choice for industrial and automotive applications. It is available in a variety of sizes, including inches.
worm reducerAGknx Single

Worm reducer gearboxes can be classified as sacrificial gears. It is used to reduce the torque of the machine. It has two parts: a worm and wheels. The worm can be made of brass or steel. Brass worm gears corrode easily. Phosphorus EP gear fluid can run on brass worm gears. It creates a thin oxide layer on the gear teeth, protecting them from impact forces and extreme mechanical conditions. Unfortunately, it can also cause serious damage to the brass wheels.
Worm reducer gearboxes work by transferring energy only when the worm is sliding. This process wears away the lubricating layer and metal of the wheel. Eventually, the worm surface reaches the top of the wheel and absorbs more lubricant. This process will repeat itself in the next revolution.
Worm reducer gearboxes have two benefits: they are compact and take up little space. They can slow down high-output motors while maintaining their torque. Another important feature of the worm gear reducer gearbox is its high transmission ratio capability. It can be installed in both vertical and horizontal positions, and a bidirectional version is also available.
Worm gears have some complications compared to standard gear sets, but overall they are reliable and durable. Proper installation and lubrication can make them sturdy, efficient devices.
A-Drive AGknx Single

If you’re considering purchasing a new worm gear reducer gearbox for your A-Drive AGknx single, you need to understand your goals. While single-stage worm reducer gearboxes can be used, their reduction ratios are often limited. In most cases, they can only achieve a reduction ratio of 10:1. However, there are other types of gears that provide additional speed reduction capabilities.
The worm reducer gearbox consists of two parts: the input worm and the output worm. Each component has its own rotational speed, the input worm rotates in a single direction and the output worm wheel rotates vertically. In a five-to-one ratio, the input worm rotates five times for each output worm. Likewise, a 60-to-1 ratio requires 60 revolutions of each worm. Due to this arrangement, the worm reducer gearbox is inefficient. Gear reduction is inefficient due to sliding friction rather than rolling friction.
Worm reducer gearboxes are also susceptible to thermal stress. They run hotter than hypoid reducer gearboxes, which reduces their useful life. In addition to higher heat, worm reducer gearboxes can experience component failure over time. In addition, an oil change is imminent due to the deterioration of lubrication.
The worm gear reducer gearbox of the A-Drive PPC single is a direct drive gearbox for personal watercraft. It has bronze bushings, aluminum gears, and a spool box. The spool box has a quarter-inch plated spool to wrap 1/4-inch 7 x 19 aircraft cable. Its design also makes it a more efficient alternative to belt-driven AGknx cranes.
worm reducerAGknx X & H

The AGknx X & H worm gear reducer gearbox series is a high-performance universal mount worm gear reducer gearbox. It features a spur gear primary on the input for higher performance and a wider range of gear ratios. Its design also allows it to be used with a variety of input shaft types, including shaft and closed-coupled applications.
It is available in a variety of sizes, including popular frame sizes 90 and 110. The worm shaft is made of case-hardened alloy steel with a cast iron hub and bronze ring gear. The standard output shaft is hollow. There are also models with dual single-shaft outputs.

China 60mm 300 watt BLDC motor Worm geared Brake Brushless Dc Motor 300W braked 48V NEMA24 Gearbox Reducer     compact worm gearboxChina 60mm 300 watt BLDC motor Worm geared Brake Brushless Dc Motor 300W braked 48V NEMA24 Gearbox Reducer     compact worm gearbox
editor by Cx 2023-06-28